LAMBDA Laboratory Instruments - peristaltic pumps
PERISTALTIC PUMPS SERVICES CONTACT PRICE LAMBDA INSTRUMENTS E-SHOP
Bombas peristálticas Schlauchpumpen Pompes péristaltiques Peristaltická čerpadla
Peristaltic Pumps Lambda
Description
Specifications
Construction advantages
Publications
Operating Instructions
Guarantee
PDF Documents

Peristaltic pumps – Tubing pumps by LAMBDA – Description

LAMBDA PRECIFLOW, MULTIFLOW, HiFLOW, MAXIFLOW and MEGAFLOW

The high quality LAMBDA peristaltic pumps PRECIFLOW, MULTIFLOW, HIFLOW, MAXIFLOW and MEGAFLOW have been specially developed for long term continuous processes like in fermentations and cell cultures.

LAMBDA’s unique tubing compressing mechanics reduces pulsation and is very gentle to the tubing. This leads to a long tubing life and the long term stability of flow rates even with low cost tubing. The tubing economy is such that the peristaltic pump is paid back after the use of only 80 m of tubing. Thus, this is the only pump on the market, which saves more money than it costs!

Fits in your hand – the LAMBDA peristaltic pump

LAMBDA peristaltic pumps are so handy that they can be easily kept just in one hand and take only minimal space in any installation. LAMBDA peristaltic pumps are programmable with extensive remote control possibilities and an extremely broad digital flow rate setting in the range from 1 to 1000.

Below the main characteristics of the LAMBDA peristaltic pumps are outlined:

  • Most compact peristaltic pumps of this type on the market
  • Flow rates from 0.01 to 10000 ml/hour
  • Greatly extended tubing life with decreased pulsation and very economic in use
  • Large digital speed setting range from 1:1000
  • Flow rate programming (up to 99 steps) and automatic switch-on and switch-off without using any timer
  • New motor technology
  • Extensive remote controls
  • Access to reaction kinetics by using the Pump-Flow INTEGRATOR
  • RS-485 or RS-232 interface (optional)
  • PNet control software (optional)
  • Virtually noiseless operation
  • Low voltage plug-in power supply for maximum safety

LAMBDA peristaltic pumps are used wherever a reliable, precise and long term stable operation is required - for example in continuous processes as is often the case in many biotechnology applications, fermentation, cell cultures, chromatography and the like. Therefore, they are also used together with the laboratory fermenter-bioreactor system LAMBDA MINIFOR.

A real breakthrough in the utilization of the peristaltic pumps is provided by the pump-flow INTEGRATOR which can be further complemented by the PC control software PNet. This allows using the pumps for new applications, where special expensive instruments had to be used before. It is possible to use the pumps to create gradients, to follow the kinetics of chemical or biological processes, measure growth rates and the extent of growth of cultures in biotechnology, etc. The LAMBDA pumps are very well suited also for chromatography e.g. together with the polyvalent and easy-to-use LAMBDA OMNICOLL fraction collector.

The utilization of the new PNet software is not only limited to the peristaltic or syringe pumps LAMBDA VIT-FIT for liquids, but can also be used for the dosing of solid powdery substances with the LAMBDA DOSER, a unique pump for the precise dosing of solid and crystalline substances, or even for the measurement and control of the mass flow of gases with the LAMBDA MASSFLOW controller. This is essential for automatic pH control during cell cultures with the LAMBDA laboratory fermentation and cell culture system MINIFOR or other existing fermentor systems.

 ↑ Up

Properties of LAMBDA peristaltic pumps (tube pumps)

  PRECIFLOW MULTIFLOW HIFLOW MAXIFLOW MEGAFLOW
Flow rate (ml/hr)* 0–600 0–600 0–3000 0–10 000 0 - 60 000
Programming No up to 99 steps up to 99 steps up to 99 steps up to 99 steps
Motor (stepping) Yes Yes - - -
Motor (high performance BLDC) - - Yes Yes Yes
Power (max. W) 5 5 30 30 50
Weight (kg) 1 1 1.2 1.2 2.5
Warranty 5 years 5 years 2 years 2 years 2 years

(* tubing made of silicone or other material with similar elasticity (internal diameter 0.5 to 4 mm, wall thickness~ 1 mm)


 ↑ Up

New applications for LAMBDA peristaltic pumps

Utilization of LAMBDA Peristaltic Pumps

 ↑ Up


Peristaltic pump PRECIFLOW

reliable, modern peristaltic pump at low price with flow rates from 0.01 to 600 ml/hr
Peristaltic Pump LAMBDA Preciflow

The development of this peristaltic pump was based on over twenty years of laboratory experience and the systematic elimination of imperfections found in other pumps on the market. The result is a practical, precise and reliable pump which is the most compact in its class.

  • Flow rate settings from 0.01 to 600 ml/hr
  • Digital set point extending over three orders of magnitude
  • Remote controls (analog and digital)
  • Greatly extended tubing life and decreased pulsation
  • Plug-in power supply for increased safety
  • The Pump Flow Integrator allows the exact recording of the amount of liquid delivered by the pump
  • Very economic in use while using low cost tubing without stoppers
  • The most compact peristaltic pump on the market
  • 5 years of warranty

Construction advantages and properties of the PRECIFLOW — peristaltic pump

Flow rates of the PRECIFLOW peristaltic pump:

from 0.01 to 600 ml/h using tubing internal diameter 0.5 to 4 mm and wall thickness of about 1 mm

Flow rate diagram of the PRECIFLOW / MULTIFLOW Peristaltic Pumps

 ↑ Up


Peristaltic pump MULTIFLOW

reliable, modern peristaltic pump at low price with flow rates from 0.01 to 600 ml/hr, programmable up to 99 steps of flow rates and times

Peristaltic Pump LAMBDA Multiflow

The successful design and well-proved mechanics of the LAMBDA PRECIFLOW peristaltic pump has been extended by flow rate programming. Up to 99 steps of time and flow rates can be easy programmed allowing the creation of any flow rate profile.

  • Rate settings from 0.01 to 600 ml/hr
  • Digital set point extending over three orders of magnitude
  • Remote controls
  • Greatly extended tubing life and decreased pulsation
  • Low voltage plug-in power supply for maximal safety
  • The Pump Flow Integrator allows the exact recording of the amount of liquid delivered by the pump
  • Very economic in use while using low cost tubings without stoppers
  • By programming zero flow rates the pump can be switched on and off without using a timer
  • The most compact programmable peristaltic pump on the market
  • 5 years of warranty

Construction advantages and properties of the MULTIFLOW peristaltic pump

Flow rates of the MULTIFLOW peristaltic pump:

from 0.01 to 600 ml/h using tubing internal diameter 0.5 to 4 mm and wall thickness of about 1 mm

Flow rate diagram of the PRECIFLOW / MULTIFLOW Peristaltic Pumps

 ↑ Up


Peristaltic pump HIFLOW

reliable, modern peristaltic pump at low price with flow rates from 0.1 to 3000 ml/hr (3 lph), programmable up to 99 steps of flow rates and times

Peristaltic Pump LAMBDA HIFLOW

The successful design and well-proved mechanics of LAMBDA PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps of time and flow rate can be easy programmed allowing a creation of any flow rate profile. The maximum flow rate has been increased to up to 3000 ml/hr (3 lph). To achieve such a high flow rate in such a small instrument new motor technology has been used.

  • Flow rates from 0.1 to 3000 ml/hr
  • Digital set point extending over three orders of magnitude
  • Extensive remote controls
  • Greatly extended tubing life and decreased pulsation
  • Low voltage plug-in power supply for maximum safety
  • New motor technology
  • Flow rate programming (up to 99 steps)
  • Access to reaction kinetics by using the PUMP-FLOW Integrator
  • Very economic in use while using low cost tubings without stoppers
  • By programming zero flow rates the pump can be switched on and off without using a timer

Construction advantages and properties of the HIFLOW peristaltic pump

Flow rates of the HIFLOW peristaltic pump:

from 0.1 to 3000 ml/h using tubing internal diameter 0.5 to 4 mm and wall thickness of about 1 mm

Flow rate diagram of the HIFLOW Peristaltic Pumps

 ↑ Up


Peristaltic pump MAXIFLOW

reliable, modern peristaltic pump at low price with flow rates from 0.3 to 10 000 ml/hr (10 lph), programmable up to 99 steps of flow rates and times

Peristaltic Pump LAMBDA MAXIFLOW

The successful design and well-proved mechanics of LAMBDA PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps of time and flow rate can be easy programmed allowing a creation of any flow rate profile. The maximum flow rate has been increased to up to 10 000 ml/hr (10 lph). To achieve such a high flow rate in such a small instrument new motor technology has been used.

The development of this peristaltic pump is based on over twenty years of laboratory experience and the systematic elimination of imperfections found in other pumps on the market. The result is a practical, precise and reliable pump which is the most compact in its class.

  • Flow rates from 0.3 to 10 000 ml/hr
  • Digital set point extending over three orders of magnitude
  • Extensive remote controls
  • Greatly extended tubing life and decreased pulsation
  • Low voltage plug-in power supply for maximum safety
  • New motor technology
  • Flow rate programming (up to 99 steps)
  • Access to reaction kinetics by using the PUMP-FLOW Integrator
  • Very economic in use while using low cost tubings without stoppers
  • By programming zero flow rates the pump can be switched on and off without using a timer

Construction advantages and properties of the MAXIFLOW peristaltic pump

Flow rates of the MAXIFLOW peristaltic pump:

from 0.3 to 10000 ml/h using tubing internal diameter 0.5 to 4 mm and wall thickness of about 1 mm

Flow rate diagram of the MAXIFLOW Peristaltic Pumps

 ↑ Up


Peristaltic pump MEGAFLOW

reliable, modern peristaltic pump at low price with flow rates from 1.2 to 60 000 ml/hr, programmable up to 99 steps of flow rates and times

Peristaltic Pump LAMBDA MEGAFLOW

MEGAFLOW is a specially designed laboratory peristaltic pump for long term continuous processes with increased flow rates of up to 60’ 000 ml/hour. High precision, reproducible and long term stable flow rates are achieved with the quartz driven BLDC motor and unique tubing compression technique in the large pump head

  • Rate settings from 1.2 to 60 000 ml/hr
  • 2 years of warranty
  • The stackable and extremely compact peristaltic pump saves valuable bench - space in your laboratory

 ↑ Up

Copyright © Lambda Instruments. All Rights Reserved.
Our partners: All Czech biotech information in one place South Moravian Innovation Centre